4.6 Programming Examples; Section 4.6 Programming Examples - Notifier AM2020 User Manual

4.6 Programming Examples

Options
The example below illustrates three ways to accomplish the simple programming task of programming a
Notification Appliance (control module) on SLC Loop 1 to indicate activation of an Initiating Device (smoke
detector) also on SLC Loop 1.
Solution C
Solution A
Solution B
Program the smoke
Program the smoke
No Control-By-
detector with the
detector with the
Event required for
Control-By-Event:
Control-By-Event:
the smoke detector.
(L1M1)
(Z1)
Software
Zone Z1
Type: FZON
Program the control
No Control-By-
module with the
Event required for
Control-By-Event
the control module.
OR(L1D1)
Program the control
module with the
Control-By-Event
OR(Z1)
3-68 Programming 15088:K 3/21/01