LevelOne KVM-0306 User Manual page 9

3-port dvi kvm switch with audio

Table of Contents

Available languages

4.3 Audio (Speaker + Microphone) Selection

4.3.1 (PC + Audio) Combination Selection

Hot Key:

[Scroll] → [Scroll] → [ F1 ]→[Enter] or

[Scroll] → [Scroll] → [ F2 ]→[Enter] or

[Scroll] → [Scroll] → [ F3 ]→[Enter]

4.3.2 Single Audio ( Speaker + Microphone ) Selection

Hot Key:

[Scroll] → [Scroll] → [A] →[Enter] to enable or disable the audio auto switch mode

[Scroll] → [Scroll] → [A] → [1]→ [Enter] to select PC1 Speaker and Microphone

[Scroll] → [Scroll] → [A] → [2]→ [Enter] to select PC2 Speaker and Microphone

[Scroll] → [Scroll] → [A] → [3]→ [Enter] to select PC3 Speaker and Microphone

Note 1: Audio auto switch mode, the default setting of KVM switch is enabled,

means when you used the push button, the PCs and Audio will be

switched at the same time. In case of the Audio auto switch mode is

disabled, then the push button only switch PCs.

Note 2: One long sound – Audio auto switch disabled

Two short sound – Audio auto switch enabled

Table of Contents

Need help?

Do you have a question about the KVM-0306 and is the answer not in the manual?