Setting Your Sky Active Keypad To Operate Your Sky - Pace Sky Using Manual

If you leave your remote control without batteries for longer than 10
minutes, your remote control settings for operating your TV are lost. After
replacing the batteries you can control your box as usual but you have to reset
it to work with your TV, as described in this chapter.
Dispose of batteries in an environmentally friendly manner.

Setting your Sky Active keypad to operate your Sky

Your Sky Active keypad can be set up to operate your Sky box.
To set up your keypad complete the following steps:
1 Turn your TV on.
2 Press the TV/sat button on your keypad.
3 Hold down select and the blue key at the same time for about two seconds,
until the red light on your keypad blinks twice.
4 Press 2 then select .
5 Press Sky on your keypad.
Using your Sky box
47