Turning On And Tuning In; Turning Your Set-Top On And Off - Pace DC511P Operator's Manual

TURNING ON AND TUNING IN

Turning your set-top on and off

After you have connected your set-top to the AC wall outlet (and switched this outlet ON, if it has
a switch), the light around the power button on your set-top's front panel should be red.
Wait for a few seconds, then press the button labeled power on the front panel of your set-top to
turn it on. The light around the power button goes from red to green, to show that your set-top is
on.
If the light around the power button is neither red nor green, there is a problem.
To turn your set-top on or off at any time, press the power button on its front panel or the CBL
button on your remote control.
It is important that, unless there is a lightning storm or you will be away from your home for a long time,
you do not unplug your set-top at the wall AC outlet (or do not switch it off there, if the outlet has a
switch). Your set-top can not be updated with new features, through the cable, if it is disconnected from
the AC power supply.
You can use the General Settings screen to set the POWER OUTLET (AC Outlet) on your set-top to be
"Always on" or "On with cable box (Settop)". With this second setting, a TV attached to POWER OUTLET
will turn off when you turn off your set-top and will turn on when you turn on your set-top.
12
NOTES
power
To turn on your
The light around
set-top, press
the button changes
power
the
from red to green.
button.