Lightning Storms; Turning Your Set-Top Box On And Off - Pace xfinity X1 User Manual

CONNECTING THE EQUIPMENT (cont.)

Lightning storms

Disconnect your set-top box's power cord during lightning storms. A lightning storm may affect your set-top box,
if it is on during the storm. It may appear that it has stopped working, but you can easily restore its operation as
follows:
Unplug your set-top box's power supply unit from the wall AC outlet. Then plug this power supply unit in again at
the wall AC outlet (and, if there is a switch by this outlet, switch it to its ON position).

Turning your set-top box on and off

After you have connected your set-top box's power supply unit to the wall AC outlet (and switched this outlet
ON, if it has a switch), press the
around the Power button should light up green, to show that your set-top box is on.
To turn your set-top box on or off at any time, press the
also page 16, if you have an RF remote control).
Never turn off your set-top box by simply disconnecting it from the power supply. If you need to disconnect your
set-top box, first stop any recording (if applicable). Then turn off your set-top box by pressing the
button on the front panel or your remote control, so that the Power light goes off. Then wait 60 seconds before
removing the power supply unit from the wall AC outlet.
Power Saving: To save power and money, and to reduce greenhouse gas emissions, turn off your
set-top box, using the Power button, when it is not in use.
Power button on your set-top box's front panel to turn it on. The Power light
Power button on the front panel or remote control (see
To turn your set-top box on,
press the
A green light around
the button turns on.
Power
Front panel display,
showing the time.
Power button.
15