Lightning Storms - Pace DC511P Operator's Manual

TURNING ON AND TUNING IN (cont.)
6. Tune your VCR by setting the VCR's RF output channel to the same RF channel number as the
set-top and TV (either 3 or 4). If you do not know how to do this, consult the manual that came
with your VCR.
Everything should now be tuned correctly.
Regardless of the program channel number you select on your set-top, the RF output channel number
will always be fixed (either 3 or 4, as quoted by your cable operator). Your TV and VCR must be tuned to
that channel if you want to watch and record programs through the RF coaxial cables.

Lightning storms

Occasionally, a lightning storm may affect your set-top. It may appear that it has stopped working, but
you can easily restore its operation as follows.
Unplug your set-top's power cord at the wall AC outlet. Then plug this power cord in again at the
wall AC outlet (and, if there is a switch by this outlet, switch it to its ON position).
14
NOTE