Table of Contents
Advertisement
IF PROBLEMS ARISE
If any of your telephone equipment is not operating properly, you should immediately remove it from your
telephone lines, as it may cause harm to the telephone network. If the telephone company notes a problem, they
may temporarily discontinue service. When practical, they will notify you in advance of this disconnection. If
advance notice is not feasible, you will be notified as soon as possible. When you are notified, you will be
given the opportunity to correct the problem and informed of your right to file a complaint with the FCC.
In the event repairs are ever needed on your Visualink 128 or VisuaLink 384, they should be performed by
NEC America, Inc. or an authorized representative of NEC America, Inc. For information contact:
NEC America, Inc.
1555 W. Walnut Hill Lane
Irving, Texas 75038-3797
USA
972-751-7000
FCC REQUIREMENTS FOR CONNECTION OF TELEPHONE SYSTEMS
In order to connect this system to the telephone network, provide the telephone company with:
• the quantities and USOC numbers of the required jacks (shown below);
• the sequence in which the trunks are to be connected;
• the facility interface codes by position; and
• the ringer equivalence number or service code, as applicable, by position
MFG's Port
USOC Jack
ID
Connector
VisuaLink 128
N/A
VisuaLink 384
N/A
REN/Service
Facility Interface
Code
Code
6.0P
02IS5
6.0P
02IS5
# CO
# Stations
Ports
1
1
AY5JPN-32617-XD-N
3
1
AY5JPN-32617-XD-N
Registration #
Advertisement
Table of Contents
