Table of Contents
Advertisement
VisuaLink 128/384 Quick Installation Guide
NDA-24232 Issue 2.0
14.Using the Phillips screwdriver, remove the three (3) screws that attach the BRI
interface to the mother board. Remove the BRI interface card from the
motherboard and replace with the 384 IMUX card. Place the BRI interface card
on the non-static bag or surface.
Note: The BRI interface and the motherboard are connected on the right side of
each card, pull the connectors apart, being careful not to break either unit.
Screws
Connector
15.Fasten the 384 IMUX card to the motherboard.
16.Locate the 384 rear panel.
O
U
T
I
N
VIDEO2
TEL
S/T LINE 1
MIC1
MIC2
MIC3
VIDEO1
AUDIO
Serial1
Serial2/RMT
Chapter 5
Screw
384 IMUX Card
Mother Board
S/T LINE 2
S/T LINE 3
DC IN 5V
-
+
Page 5-5
Advertisement
Table of Contents
