Table of Contents
Advertisement
Selecting a category
Depending on the number of categories
available, you will see the main category list
either with the character bar (option 1) or as
a selection list (option 2).
Option 1: main category list with
character bar
Select a category. Proceed as described in
X
the "Entering characters" section
(
page 30).
Y
Main category icon
:
Main category list
;
Option 2: main category list as selection
list
Select a main category by turning cVd the
X
COMAND controller.
Example display: main category list for points of
interest
Selected main category with the G icon
:
for subcategories
Entering a point of interest
Irrespective of the option, press W to
X
confirm your selection.
If the selected main category does not
contain any sub-categories, the point of
interest list appears.
If the selected main category contains sub-
categories, you will see the list of sub-
categories either with the character bar
(option 1) or as a selection list (option 2).
The following illustration shows the
RESTAURANT
main category with available
sub-categories as an example.
To call up all entries in the
:
main category
To call up all entries in the
;
subcategory
Character bar
=
Option 1: select a category. Proceed as
X
described in the "Searching for a phone
book entry" section (
Y
Option 2: select a category by turning
X
cVd the COMAND controller.
Irrespective of the option, press W to
X
confirm your selection.
The point of interest list appears. It
contains the points of interest available in
the sub-category that are within the search
radius.
i
Search radius means: COMAND searches
within a radius of approximately 100 km
and ceases searching when 50 points of
interest have been found.
If COMAND does not find any points of
interest within this radius, it extends its
65
RESTAURANT
BREWPUB
page 110).
Z
Advertisement
Chapters
Table of Contents
