Table of Contents
Advertisement
by channel number and allows you to
browse all available channels.
Selecting a channel
Channel search
Turn cVd or slide XVY the COMAND
X
controller while the display/selection
window in the SatRadio display is active.
or
Press the E or F button.
X
COMAND searches in both directions
(ascending and descending) and stops at
the next channel found in the selected
category.
SatRadio menu
Select
Sat Radio
in the submenu bar by
X
turning cVd the COMAND controller and
press W to confirm.
The SatRadio menu appears.
Entering channel numbers directly
Option 1
Press the l button.
X
An input menu appears.
Option 2
Select
Sat Radio
in the submenu bar by
X
turning cVd the COMAND controller and
press W to confirm.
Select
Enter Channel
X
confirm.
An input menu appears.
To enter a channel: irrespective of the
X
option, press the corresponding number
keys on the control panel one after the
other.
COMAND sets the selected channel.
i
digits.
Selecting a channel from the SatRadio
channel list
Select
X
turning cVd the COMAND controller and
press W to confirm.
Select
X
confirm.
The channel list appears.
Select a channel by turning cVd the
X
COMAND controller and press W to
confirm.
Memory functions
Storing channels
i
Press W the COMAND controller when the
X
display/selection window is active.
or
Select
X
turning cVd the COMAND controller and
press W to confirm.
In both cases, the channel presets appear.
The R dot in front of a preset entry
indicates that the currently selected
channel is stored under this preset.
and press W to
Satellite radio
You can only select currently permitted
Sat Radio
in the submenu bar by
Channel List
and press W to
There are ten presets available.
Presets
in the submenu bar by
131
Advertisement
Chapters
Table of Contents
