Mercedes-Benz Comand MY11 Operating Instructions Manual page 58

Destination entry
56
COMAND controller and press W to
confirm.
You will see the house number list either
with the character bar (option 1) or as a
selection list (option 2).
Option 1: house number list with
character bar
Enter 4 and 0. Instructions for entering
X
characters using city input as an example
can be found in the "Entering characters in
navigation mode (entering a city)" section
( page 30).
Y
Option 2: house number list as selection
list
House number list
Select an entry by turning cVd the
X
COMAND controller.
Irrespective of the option, press W to
X
confirm your selection.
The address entry menu appears again. The
house number has now been entered.
Starting route calculation
You can now have COMAND calculate the
route to the address entered or save the
address first, e.g. as your home address (My
address) ( page 57).
Y
Address entry menu with destination address
Destination address
:
To start route calculation
;
In the address entry menu, confirm
X
by pressing W.
If no other route has been calculated, route
calculation starts immediately (Option 1). If
another route has already been calculated
(route guidance is active), a prompt
appears (option 2).
Option 1 – no route guidance active: route
calculation starts. While route calculation is
in progress, an arrow will indicate the
direction to your destination. Below this, you
will see a message, e.g. Calculating Fast
Route....
Once the route has been calculated, route
guidance begins. If the vehicle is traveling on
a non-digitized road, the system displays the
linear distance to the destination, the
direction of the destination and the
Mapped Road message. In this case, the
display will be grayed out.
Option 2 – route guidance is already
active: if route guidance is already active, a
prompt will appear asking whether you wish
to terminate the currently active route
guidance.
Start
Off