Table of Contents
Advertisement
If another audio source is switched on, you
can now switch to audio AUX mode in the
audio menu.
Select
Audio
using ZV and press W to
X
confirm.
The audio menu appears.
Select
Aux
using cVd and press W to
X
confirm.
The audio AUX menu appears. The medium
in the external audio source is played, if the
source is connected and playback
selected.
Please see the respective operating
instructions for how to operate the external
audio source.
You will find details on volume (
and sound (
page 35) settings in the "At a
Y
glance" section.
G
WARNING
External audio sources may have different
volumes, which can mean that system
messages such as traffic announcements and
navigation system announcements are much
louder. If necessary, please deactivate the
system messages or adjust their volume
manually.
Increasing the volume using COMAND
In some cases, the volume of the external
audio device may be quieter or louder, or the
usual maximum possible volume may be
lower. On some devices, it is possible to
adjust the volume separately. In this case,
start at a medium volume and increase it
gradually. This enables you to determine
whether the system is able to play the music
at high volume without distorting it.
Select
Volume
in the AUX display by turning
X
cVd the COMAND controller and press
W to confirm.
A menu appears. The # dot indicates the
current setting.
Select
X
confirm.
Standard: the volume of the external audio
source is adjusted to a standard value.
Boost: the volume of the external audio
source is raised by approximately 10 dB.
page 35)
Y
Audio AUX mode
Standard
or
Boost
and press W to
159
Z
Advertisement
Chapters
Table of Contents
