Maytag NEPTUNE MAH-2 Use & Care Manual page 22

B Y C
EFORE OU
C
HECK THESE POINTS IF YOUR
Won't Fill
Won't Tumble
Door Locked Shut;
Will Not Open
Freshening
Your Washer
Is Noisy
The Touchscreen is
Fading
For further assistance, call Maytag Customer Assistance toll-free at 1-800-688-9900 USA and 1-800-688-2002
Canada. U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
.
ALL
CONT
M
AYTAG
• Be sure the door is tightly closed.
• Plug cord into a live electrical outlet.
• Check fuse or reset circuit breaker.
• Open and close the door, then push the Start/Pause touchpad.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• Check fuse or reset circuit breaker.
• Open and close the door and press the Start/Pause touchpad. For your safety, the clothes washer will
not tumble or spin unless the door is closed.
• Press the Start/Pause touchpad to stop the washer.
• It may take a few moments for the door lock mechanism to disengage.
• See Cleaning the Interior, page 18.
• Clothes washer should be leveled properly as outlined in installation instructions.
• Check that the leveling leg lock nuts are tightened.
• Be sure rubber feet are installed on leveling legs.
• Weak floors can cause vibration and walking.
• For information on normal operating sounds, see page 22.
• The contrast may need to be adjusted. Select "Help" then "Select Preferences". Touch "Change
Monitor Contrast". Using the arrows move the block to the left or right to improve the visual
quality of the touchscreen.
N ...
®
EPTUNE WASHER
21