Data Security Settings - Kyocera 5550ci Operation Manual

Limitations:
- Scanning speed will be limited to the speed of scanning 600 dpi image. (Printing speed will not
be limited.)
- FAX transmission will be limited to the memory transmission.
Note:
- The Printed Document Guard Kit can not fully prevent a leak of information. We do not guarantee
any loss incurred while using this feature or if a malfunction occurs with this feature.
- The guard pattern printed on the colored paper or paper that is decorated with special design
may not be detected.
- We do not guarantee the integrity of the detection. If a malfunction occurs, contact your service
representative.
Use the procedure below to specify the Document Guard setting.
1
Press the System Menu key.
2
Press [System] and then [Change] of Document Guard.
NOTE:
If the user authentication screen appears, enter your login user name and password and then press
[Login]. For this, you need to login with administrator privileges. Refer to Adding a User on page 10-5 for the
default login user name and password.
3
Press [On].
4
Press [OK].

Data Security Settings

Settings related to data stored in the machine's hard disk and memory can be configured.
Hard Disk Initialization
When the optional Data Security kit is installed, [Hard Disk Initialization] is added to the Data Security settings.
For details, refer to the Data Security Kit (E) Operation Guide on the bundled DVD.
9-107
Default Setting (System Menu)
9