Interface Block Setting - Kyocera 5550ci Operation Manual

Interface Block Setting

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or
optional interfaces.
The following interface block settings are available:
• USB Host (USB Port setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)
USB Host (USB Port setting)
This locks and protects the USB Port (A1) or USB port (A2) (USB host). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
1
Press the System Menu key.
2
Press [System], [Next] of Interface Block Setting and then [Change] of USB Host.
NOTE:
If the user authentication screen appears, enter your login user name and password and then press
[Login]. For this, you need to login with administrator privileges. Refer to Adding a User on page 10-5 for the
default login user name and password.
3
Press [Block].
4
Press [OK].
USB Device (USB interface setting)
This locks and protects the USB interface connector (B1) (USB Device). The default setting is Unblock.
Use the procedure below to specify the USB Device setting.
1
Press the System Menu key.
2
Press [System], [Next] of Interface Block Setting and then [Change] of USB Device.
3
Press [Block].
4
Press [OK].
Optional interface (Optional interface card setting)
This locks and protects the optional interface slots (OPT1 or OPT2). The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
1
Press the System Menu key.
2
Press [System], [Next] of Interface Block Setting and then [Change] of Optional Interface 1 or Optional
Interface 2.
3
Press [Block].
4
Press [OK].
9-105
Default Setting (System Menu)
9