Unknown Login User Name Job - Kyocera 5550ci Operation Manual

For a user without administrator rights who logs in
These users can partially change their own user properties including user name, login password, and E-mail
address.
Although login user name, access level, or account name cannot be changed, the users can check the present
status.
Use the procedure below to change user properties.
User:
User Name:
Change
01 User
Login User Name: Detail
0099
Access Level:
User
E-mail Address: Change
abcd@efg.com
Status

Unknown login user name Job

This specifies the behavior for handling the jobs sent with unknown login user names or User ID (i.e. unsent
IDs). If the User Login is set to invalid and Job Accounting is set to valid, follow the procedure when the Account
ID is unknown.
The table below shows the available settings.
Item
Reject
Permit
Login Password: Change
**********
Account Name: Detail
02 Account
ID Card Information:
Empty
Cancel Save
10/10/2010 10:10
The job is rejected (not printed).
The job is permitted to be printed.
Deleting a user
1 Press [Delete].
2 Press [Yes] on the screen to confirm deletion.
The selected user will be deleted.
NOTE:
The default user with administrator rights
cannot be deleted.
1
Press the System Menu key.
2
Press [User Property].
3
Refer to steps 6 to 19 of Adding a User to change
user properties.
Press [Detail] of Login User Name or Account
Name to check the present status.
4
Press [Save] to finalize changed user properties.
Description
10-9
Management
10