Kyocera 5550ci Operation Manual page 477

Error Message
Job separator tray is
full of paper.
KPDL error.*
Machine failure.
Mailbox tray is full of
paper.
Main unit inner tray is
full of paper.
Main unit upper left
tray is full of paper.
Maximum number of
scanned pages.
Memory is full.*
No item has been
entered. Please enter
item.
Paper left.
Paper jam.
Please enter
password.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
Is the acceptable storage
capacity exceeded?
—
—
Is the acceptable storage
capacity exceeded?
Is the acceptable storage
capacity exceeded?
Is the acceptable storage
capacity exceeded?
Is the acceptable scanning
count exceeded?
—
—
Did you enter an item name
for the created item in the
item create screen?
—
—
―
12-13
Corrective Actions
Remove the paper and press
[Continue]. Printing then resumes.
PostScript error has occurred.
The job is canceled. Press [End].
Internal error has occurred. Make a
note of the error code displayed on
the touch panel. Call service.
Remove the paper. Printing then
resumes.
Remove the paper. Printing then
resumes.
Remove the paper and press
[Continue]. Printing then resumes.
Cannot scan pages any more. Follow
the instructions on the touch panel.
The memory is full and the job cannot
be continued. Press [Continue] to
print the scanned pages. The print
job cannot be processed completely.
Press [Cancel] to cancel the job.
The process cannot be performed
due to insufficient memory. If only
[End] is available, press [End]. The
job will be canceled.
Enter an item name.
Remove paper from the document
finisher.
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instructions to remove the jammed
paper.
Enter the password.
Troubleshooting
Reference
Page
—
—
—
—
—
—
—
—
—
―
12
—
12-21
―