Kyocera 5550ci Operation Manual page 479

Error Message
Send error.*
Staple is empty.*
Staple jam.
System error.
The cover is open.
The folding tray is
open.
The folding unit is
open.
The phone receiver is
off the hook.
The removable
memory is not
formatted.
The slit glass requires
cleaning.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
—
Has the document finisher
run out of staples?
—
—
Is there any cover which is
open?
—
—
—
Is the removable memory
formatted by this machine?
—
12-15
Corrective Actions
An error has occurred during
transmission. Refer to Responding to
Send Error for the error code and
corrective actions.
If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the touch panel.
Leave the machine on and follow the
instructions to replace the staple case.
Press [Continue] to print without stapling.
Press [Cancel] to cancel the job.
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instructions to remove the jammed
staple.
System error has occurred. Follow
the instructions on the touch panel.
Close the cover indicated on the
touch panel.
Set the folding tray.
Close the folding unit.
Put down the receiver.
Perform [Format] on this machine.
Clean the slit glass using the cleaning
cloth supplied with the document
processor.
Troubleshooting
Reference
Page
12-17
—
—
—
—
—
—
12
—
—
11-16