Location And Function Of Parts And Controls; Front - Sony UP-960 Instructions For Use Manual

Location and Function of Parts and Controls

For details, refer to the pages indicated in parentheses.

Front

1 UPower ON/OFF switch (39, 41, 47)
Turns the power on.
The FEED, COPY and PRINT buttons light
up.
2 Paper feeder and cutter
Cuts the printing paper.
3 IMAGE SIZE STD (standard)/SIDE
selector (43)
Selects the printing direction.
4 IMAGE SIZE NORMAL/SMALL
selector (43)
Selects the printing size.
5 CONTR (contrast) control (45)
Adjusts the contrast of the printouts.
6 BRIGHT (brightness) control (45)
Adjusts the brightness of the printouts.
7
FEED button (40, 41, 42)
Press to feed the paper. The paper feeds as
long as the FEED button is held down.
Pressing this button during printing results in
interrupting the printing.
52
Others
8
COPY button (42)
Prints another copy of the previous printout.
9
PRINT button (41, 42)
Prints the picture currently displayed on the
video monitor. The picture displayed when
you press the PRINT button is stored in
memory.
0 PAPER EMPTY indicator (41)
Lights when the printer is out of paper.
!¡ OPEN/CLOSE button (39, 40, 41, 42,
47, 48)
Opens or closes the door panel. Also,
interrupts printing midway.
When the door panel is open, the following
sub panel appears.
NO
FUNCTION AGC
ON
OFF
For details, see page 34.
1 2 3 4 5 6 7 8
ON
IMAGE SHARPNESS GAMMA POST FEED RESERVED RESERVED
ON POSI SOFT TONE ON
OFF
OFF NEGA HARD TONE TONE OFF
ON
DIP switches