Led And Beeper Indicators - Datalogic Magellan 3200VSI Quick Reference Manual

LED and Beeper Indicators

The scanner's beeper sounds and its green LED illuminates to indicate
various functions or errors on the scanner. The tables below list these
indications. An exception to the behaviors listed in the tables is that the
scanner's functions are programmable, and may or may not be turned
on. For example, certain indications, such as the power-up beep can be
disabled using programming bar code labels.
LED
INDICATION
Power-on
indication
Good Read
Indication
Scanner
Ready
Sleep Mode
Host Disable
Diagnostics
Prog. Mode
6
Table 2. Green LED Indications
INDICATION
Bright green flash
Bright green flash
Constant dim green
Green LED slowly
and continuously
changes from off to
dim to off.
Constant green
flash at 1 Hz
(100mS on, 900mS
off)
Varies (see Error
Codes on page 8
for more informa-
tion)
See Host Disable
above.
COMMENT
Indicates the scanner has finished all
its power-up tests and is now ready
for operation.
Indicates a bar code has been read
and decoded.
The scanner is ready for operation.
The scanner is in Sleep Mode. To
wake the scanner up, move an object
in front of its window or press the
button atop the unit. This indication
is optionally configurable, and may
have been programmed to behave
differently.
The scanner is disabled due to receiv-
ing a disable command from the POS
terminal.
The LED can provide diagnostic feed-
back if the scanner discovers a prob-
lem during SelfTest.
The scanner is in Programming
Mode.
TM
Magellan 3200VSi