Datalogic Magellan 3200VSI Quick Reference Manual page 13

Programming
Upon completing the physical connection between the reader and its
host, proceed directly to the Programming Bar Codes table below to
locate the interface type the reader is connected to (for example: RS-232,
Keyboard Wedge, USB, etc.).
Use the Bar Code Mask on the preceding page to isolate the bar code you
intend to scan. Scan a START/END bar code once to enter Programming
Mode. After selecting (scanning) the interface, scan the START/END bar
code a second time, which will then accept your changes, exit Program-
ming Mode and return the reader to normal operation.
You can select other options and customize your reader through use of
the instructions and programming bar codes available in the PRG, or use
the On Screen Programming (OSP) utility available from the website
listed on the back cover of this manual.
START / END
PROGRAMMING BAR CODES
RS-232 Standard
RS-232 Wincor-Nixdorf
IBM 4683 Port 5B
Quick Reference Guide 11