Table of Contents
Advertisement
Simplex
®
LP1000 Series
Exit Device Operator
Mechanical Features
Construction:
Heavy-duty cylindrical lock housing; all metal; cast front housing; brass mounting plate; fixed cast ADA-
compliant lever
Installation:
Recessed through bolts may be required. Exit Device preparation.
Door handing:
Factory-handed; not field reversible
Numeric pushbuttons:
Vandal resistant, 5 button, anodized aluminum, mechanical
Weight:
8 lbs. (3.6 kg)
Strike:
Not supplied. (Comes with Exit Device)
Latch & Exit Device:
Not supplied
Key override:
Compatible with major manufacturers of removable cores: ASSA, Best and Compatible (6 or 7-pin length),
Corbin / Russwin, Medeco / Yale (6-pin length), Sargent, and Schlage
Exit Device
• Von Duprin Exit Only (EO) or Exit Only Fire (EOF) 22, 88 NL, 98, 99, 9857, 9957
compatibility:
• Dorma 9100, 9300, 9400
• Detex Advantex Series 10, 20, 21, 40, 50, 51
• Monarch XX-R*, FXX-R, 18-R*, F-18-R*, XX-V*, F-XX-V*, 18-V*, F-18-V* (*Requires special
• Cannot be used with mortise design or most vertical rod Exit Devices
Tailpiece:
2
3
Exit Device hub
Up to 60˚, counterclockwise for left hand & clockwise for right hand
rotation:
Door thickness:
1
3
Finishes:
Satin Chrome 26D (626), Bright Chrome 026 (625)
Control:
Combination change tool
Minimum stile
5" (127 mm)
requirement:
Lock Operation
Combination code:
One code per lock made of any combination of one to five numbers (pressed individually
or simultaneously)
Code:
Thousands of possible combinations
Emergency access:
Mechanical Key override
Certification and Testing
Accessibility standard: Americans with Disabilities Act (ADA) for lever equipped lock
Fire rating:
Three-hour UL / ULC rating for "A" label doors
Environmental
Highly weather resistant
operating conditions:
Durability:
Conforms to ANSI 156.2, Grade 1
Warranty:
1 year
NOTE: Exit Device may be "Dogged" without affecting the LP1000.
k-hub adapter)
⁄
" (70 mm) tailpiece for Exit Device operation from outside
4
⁄
" (35 mm) to 2
1
⁄
" (57 mm); optional 4" (102 mm)
8
4
26
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Simplex Mechanical Pushbutton Locks and is the answer not in the manual?
Questions and answers
My Kaba Lock has a cylinder above the interior side of the combination lock which, I remember, I was supposed to turn 30 degrees with a phillips screwdriver in order to zero out the old combination. I dont remember the rest, and I cant find the manual.
To reset the combination on a Kaba Mechanical Pushbutton Lock:
1. Write down the new combination for reference.
2. Set the lock to the 'clear' position.
3. Carefully press the buttons for the new combination.
4. Turn the knob, thumb turn, or lever fully to the unlock position.
5. The new combination is now set.
6. Test the combination several times with the door open to ensure it works correctly.
For added security, include at least one set of numbers that must be pressed simultaneously.
This answer is automatically generated