Battery Usage - Motorola WT4070 Integrator Manual

Transmit Power Dialog Box (Ad-Hoc Mode)
Figure 5-26
Power Transmit Options (Ad-Hoc Mode)
Table 5-16
Field
Full Select
highly reflective environments and areas where other devices could be operating nearby, or
when attempting to communicate with devices at the outer edge of a coverage area.
30 mW Select
15 mW Select
5 mW Select
1 mW Select
other devices in very close proximity, or in instances where you expect little or no radio
interference from other devices.
Select to display the
Next

Battery Usage

Use the
Battery Usage
available: ,
CAM Fast Power Save
Use the navigation keys to select an entry. Press
Battery Usage Dialog Box
Figure 5-27
NOTE Power consumption is also related to the transmit power settings.
power for the highest transmission power level. Select
Full
to set the transmit power level to 30 mW.
30 mW
to set the transmit power level to 15 mW.
15 mW
to set the transmit power level to 5 mW.
5 mW
for the lowest transmission power level. Use this level when communicating with
1 mW
dialog box.
Battery Usage
dialog box to select power consumption of the wireless LAN. There are three settings
, and
MAX Power Save
Description
. Battery usage cannot be configured in Ad-Hoc profiles.
twice to highlight
TAB Finish
Wireless Applications 5 - 21
power when operating in
Full
.