Ip Address Entry - Motorola WT4070 Integrator Manual

5 - 18 WT4070/90 Wearable Terminal Integrator Guide
Passkey Dialog Box
Figure 5-21
Enter the passkey in the
1.
Press twice to highlight the
2. TAB
Press . The
3. ENTER

IP Address Entry

Use the
IP Address Entry
and WINS.
IP Address Entry Dialog Box
Figure 5-22
IP Address Entry
Table 5-12
Encryption
DHCP
Static
Use the navigation keys to select either
1.
Press twice to highlight the
2. TAB
Press .
3. ENTER
Selecting
Static IP
box.
Use the
IP Address Entry
text box.
Passkey
button.
Next
dialog box displays.
IP Address Entry
dialog box to configure network address parameters: IP address, subnet, gateway, DNS,
Select Dynamic Host Configuration Protocol (
list to obtain a leased IP address and network configuration information from a remote
server. DHCP is the default setting for the wearable terminal profile. When DHCP is
selected, the IP address fields are read-only.
Select to manually assign the IP, subnet mask, default gateway, DNS, and WINS
Static
addresses the wearable terminal profile uses.
DHCP
button.
Next
displays the
IP Address Entry
dialog box to enter the IP address and subnet information.
Description
) from the
DHCP
or from the drop-down list.
Static
dialog box. Selecting
DHCP
drop-down
IP Address Entry
displays the
Transmit Power
dialog