Starting The Wearable Terminal; Wt4070/90 Boot Up; Voice Only Wt4090 Boot Up; Checking Battery Status - Motorola WT4070 Integrator Manual

Starting the Wearable Terminal

Press the Power button to turn on the wearable terminal. If the wearable terminal does not power on, perform a
cold boot. See Performing a Cold Boot on page
NOTE When a battery is fully inserted in a wearable terminal for the first time, upon the wearable terminal's first
power up, the device boots and powers on automatically.

WT4070/90 Boot Up

When the WT4070/90 is powered on for the first time the splash screen appears for a short period of time followed
by the Start Up window on non-touch configurations and the calibration screen on touch enabled configurations.
OEM VERSION 02.17.0001
Start Up Window App Launcher
Figure 1-6

Voice Only WT4090 Boot Up

When the Voice Only WT4090 is powered on for the first time the three LEDs on the front housing blink as follows:
Application Controlled LED and Battery Status LED on.
All LEDs off.
Application Controlled LED on, Battery Status LED on, WLAN Status LED on.
WLAN Status LED off, Battery Status LED off, Application Controlled LED off.
The WLAN Status LED blinks indicating that the wireless connection is not connected or is solid indicating that the
wireless connection is connected.

Checking Battery Status

NOTE To navigate using the keypad refer to the WT4070/90 Wearable Terminal User Guide.
To check whether the main battery or backup battery in the wearable terminal is charged:
Select >
1. Start
Press .
2. ENTER
OEM VERSION 03.17.0001
> >
Settings Control Panel
1-8.
icon to display the
Power Battery Status
Getting Started
OEM VERSION 04.20.0004 or
05.30.0000
window.
1 - 7