Accepting A Bond - Motorola WT4070 Integrator Manual

6 - 18 WT4070/90 Wearable Terminal Integrator Guide
NOTE To filter devices in the list press ALT - F to open the filter menu. Select a device type and then press ENTER.
To change the display view press ALT - V to open the view menu. Select a view type and then press ENTER.
Use the arrow keys to select a device from the list and press ENTER. The PIN Code Request window
6.
appears.
Connection Favorite Options Window
Figure 6-24
In the PIN Code field, enter the PIN code.
7.
Press ENTER. The Pairing Status window displays.
8.
Pairing Status Window
Figure 6-25
Press P2. The devices are successfully paired. The device name moves to the Trusted Devices window.
9.

Accepting a Bond

When a remote device wants to bond with a wearable terminal, you give permission by entering a PIN when
requested.
Ensure that the wearable terminal is set to discoverable and connectable. See
1.
6-23.
When prompted to bond with the remote device the PIN Code Request window appears.
2.
Bluetooth Settings on page