Ad-Hoc; Authentication - Motorola WT4070 Integrator Manual

Ad-Hoc

Use the dialog box to select the required information to control
Ad-Hoc
appear if you selected
Press to highlight the
1. Tab
Use the navigation keys to select a channel number. The default is
2.
Ad-Hoc Settings Dialog Box
Figure 5-5
Press twice to highlight the
3. TAB
Press . The
4. ENTER

Authentication

Use the
Authentication
available and authentication is set to
Use the navigation keys to select an authentication type from the drop-down list.
1.
Press twice to highlight the
2. TAB
Press .
3. ENTER
Selecting or
PEAP TTLS
dialog box. See Encryption on page 5-15
mode. To select Ad-Hoc mode:
Infrastructure
drop-down list.
Channel
button.
Next
dialog box displays. See
Encryption
dialog box to configure authentication. If you selected
by default.
None
button.
Next
displays the dialog box. Selecting
Tunneled
for encryption options.
Wireless Applications
mode. This dialog box does not
Ad-Hoc
Channel 1 (2412 MHz)
Encryption on page 5-15 for encryption options.
mode, this dialog box is not
Ad-Hoc
, , or
None TLS LEAP
Table 5-6 lists the available authentication options.
5 - 7
.
displays the
Encryption