Editing Parameters In Memory; Editing Parameters At The M1 Level; Editing Parameters At The M2 Level - DURKOPP ADLER 550-532 Instruction Manual

Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015

7.17 Editing parameters in memory

7.17.1 Editing parameters at the M1 level

Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1. Press and hold the Memory key for 3 s.
 The controller beeps once, the key LED lights up.
The Program display shows the parameter number, the
Function display shows the parameter values.
2. Press the +/- Program keys to select a different parameter.
3. Press the Ready key to confirm the parameter.
 The key LED illuminates.
4. Press the +/- Function keys to change values.
5. Press the Reset key to return a changed value to the original
value.
6. Press the Ready key to save a change.
 The key LED goes out.
7. Press the Memory key.
 The key LED goes out.

7.17.2 Editing parameters at the M2 level

Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1. Press and hold the Memory key for 6 s.
 The controller beeps twice, the key LED lights up.
The Program display shows the parameter number, the
Function display shows the values.
2. Press the +/- Program keys to select a different parameter.
3. Press the Ready key to confirm the parameter.
 The key LED illuminates.
4. Press the +/- Function keys to change values.
55