Loading Software From A Usb Key - DURKOPP ADLER 550-532 Instruction Manual

Settings via software (sewing automat)
Error message Description
E 9 1 3 Error
Thread-pulling
knife search
E 9 1 4 Error
Thread-pulling
knife motor
Instruction manual 550-532 - 00.0 - 07/2015
Possible cause
Thread-pulling knife sensor
not responding
Thread-pulling knife motor
not running correctly

7.21 Loading software from a USB key

NOTICE
Interrupting the copy process can damage the machine.
Never pull out the USB key during the copy process.
Only pull out the USB key after the specified copying time.
When a new software version is available, this can be downloaded
from www.duerkopp-adler.com and loaded into the controller via
a USB key.
Important
The following files must be stored on the USB key:
• FUYSTS.BT
• LEEYSTS.BT1
• BT1mot
• BT1PAT
Remedy
• Main switch OFF.
• Check the sensor.
• Main switch OFF.
• Check the motor and
connections.
63