Replacing Staples In The Booklet Maker Component - Xerox Color C60 User Manual

Business Ready Finisher and Booklet Maker

Replacing Staples in the Booklet Maker Component

To replace staples in the booklet maker component:
1. Open the front door of the Business Ready finisher.
2. Grasp the booklet maker handle and pull the unit toward you until the staple
cartridges appear on the top edge of the device.
3. To remove the staple cartridge from the booklet maker, push down on the staple
cartridge handle as shown, then pull the cartridge out and up.
4. Turn the staple cartridge over.
12-4 Xerox ® Color C60/C70 Printer
User Guide