Operational Safety; Printer Location; Operational Guidelines - Xerox Color C60 User Manual

Operational Safety

Your printer and supplies were designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established
environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe
operation of your printer.

Printer Location

• Place the printer on a level, solid, non-vibrating surface with adequate strength to
hold the weight of the printer. To find the weight for your printer configuration, see
Physical Specifications.
• Do not block or cover the slots or openings on the printer. These openings are provided
for ventilation and to prevent overheating of the printer.
• Place the printer in an area where there is adequate space for operation and servicing.
• Place the printer in a dust-free area.
• Do not store or operate the printer in an extremely hot, cold, or humid environment.
• Do not place the printer near a heat source.
• Do not place the printer in direct sunlight to avoid exposure to light-sensitive
components.
• Do not place the printer where it is directly exposed to the cold air flow from an air
conditioning system.
• Do not place the printer in locations susceptible to vibrations.

Operational Guidelines

• Do not remove the paper source tray that you selected using either the print driver
or Control Panel while the printer is printing.
• Do not open the doors when the printer is printing.
• Do not move the printer when it is printing.
• Keep hands, hair, neckties, and so on, away from the exit and feed rollers.
• Covers, which require tools for removal, protect the hazard areas within the printer.
Do not remove the protective covers.
• Ensure that the rear right cover is attached. Open this cover when connecting an
interface cable.
Xerox ® Color C60/C70 Printer
User Guide
Safety
1-5