Battery Removal; On/Off Switch - Conair GMT180RCSC Instruction Manual

care of your trImmer
replacement (removal)
of blade Set
To remove blade set from your
trimmer, make sure the trimmer
is in the OFF position. Remove the
blade set by placing thumb against
the smaller cutter and pushing for-
ward, releasing the cutter assembly
from the trimmer housing. Replace
with new cutting system and reverse the removal
procedure, only this time place your thumb on the
large cutter and snap into place.

battery removal

CONTAINS NICKEL CADMIUM
BATTERY. MUST BE
COLLECTED, RECYCLED OR
DISPOSED OF PROPERLY.
DO NOT DISPOSE OF IN
THE MUNICIPAL WASTE.
1. Using a small Phillips head screwdriver, remove
the screw at the back of the trimmer.
2. Remove the battery cap and push the batteries
out. Bring the batteries to the nearest collec-
tion centre for proper disposal. DO NOT throw
the battery into the normal municipal waste
system.

on/off SwItch

To operate, simply push slide toward blade, to
stop push slide away from blade.