Battery Removal - Conair GMT189CGBC Instruction Booklet

Care OF YOur trimmer
rePlaCement (remOVal) OF Blade Set
and snap into place. Make sure the taper control is set to
the longest #1 position.

BatterY remOVal

1. Using a small Phillips head screwdriver, remove the
screws at the back of the trimmer.
2. Remove the bottom housing and push the batteries out.
Bring the batteries to the nearest collection center for proper
disposal. DO NOT throw the battery into the normal municipal
waste system.
CONTAINS NICKEL CADMIUM
BATTERY. MUST BE COLLECTED,
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE OF IN
THE MUNICIPAL WASTE.
To remove blade set from your trim-
mer, make sure the trimmer is in
the OFF position. Remove the blade
set by placing thumb against the
smaller cutter and pushing forward,
releasing the cutter assembly from
the trimmer housing. Replace with
new cutting system and reverse the
removal procedure, only this time
place your thumb on the large cutter