Conair GMT180RCSC Instruction Manual page 8

1/2" or 3/8") and go over your beard again until
you achieve the desired length.
blendIng the JawlIne
1. The Three Jawline Attachments will help you to
achieve a neat, finished trim under your chin.
To use the attachments, press it down over the
trimmerblades until it clicks into position.
Jawline comb 1 provides length of 7mm,
Jawline comb 2 provides length of 5mm,
Jawline comb 3 provides length of 3mm.
2. Hold the trimmer in an upright position and
begin trimming under your jawline, using short,
even strokes.
3. After your beard is blended, turn off the trimmer
and remove the attachment by gently pulling
up on tab.