Battery Removal - Conair GMT180WBCSC Instruction Booklet

desired length, remove the 5-position comb and,
using the blades only, define the outline of the
bottom of your mustache.
care of your trIm-
replacement (removal)
To remove blade set from your
trimmer, make sure the trimmer
is in the OFF position. Remove the
blade set by placing thumb against the smaller
cutter and pushing forward, releasing the cutter
assembly from the trimmer housing. Replace
with new cutting system and reverse the removal
procedure, only this time place your thumb on the
large cutter and snap into place.
mer
of blade Set

battery removal

CONTAINS NICKEL CADMIUM
BATTERY. MUST BE
COLLECTED, RECYCLED OR
DISPOSED OF PROPERLY.
DO NOT DISPOSE OF IN
THE MUNICIPAL WASTE.
1. Using a small Phillips head screwdriver, remove
the screw at the back of
the trimmer.
2. Remove the battery cap and push the
batteries out. Bring the batteries to the
nearest collection centre for proper
disposal. DO NOT throw the battery into the nor-
mal municipal waste system.
on/off SwItch
To operate, simply push slide toward blade, to
stop push slide away from blade.