Battery Removal - Conair BARBER SHOP PRO Series Instruction Booklet

Daily Maintenance:
1. Press the release button on the side of shaver and remove the head
assembly (see Fig. 1 & 2).
2. Use cleaning brush to whisk away any debris on and around cutter (see
Fig. 3).
3. Snap the head assembly closed (see Fig. 4).
Fig. 1 Fig. 2
Weekly Maintenance:
1. Repeat steps 1 – 3 from the Daily Maintenance cleaning steps.
2. Rinse the head of the shaver under running water (see Fig. 5). NEVER
submerge the shaver in water.
3. Leave head open for drying.
4. Press the shaver head back into place (see Fig. 4).
Fig. 5
Washable
Fig. 3 Fig. 4

BATTERY REMOVAL

1. Remove the metal housing by sliding the release button over and pulling the
bottom cover off.
2. Remove batteries by pulling them out and away from battery contacts.
3. Dispose used batteries.
Protective Cover
Internal Housing
AA Batteries
Bottom Cover
Release Button