To set virtual line based rule
1. Set <IV analysis function> to
<Enable>.
2. Set the type to <Line/Area/Scene
Change>.
The virtual line based rules can be specified
only if the intelligence video analysis type is
set to <Line/Area/Scene Change>.
3. Set the event rule to <Virtual line based
rules>.
4. Click on both starting and ending points for the line on the screen to display the popup
dialog.
5. Select a desired <Virtual Line Based Rules>.
• Right : A movement from left to right in the virtual line will be detected.
• Left : A movement from right to left in the virtual line will be detected.
• Both : A movement in any direction in the virtual line will be detected.
6. Click [OK].
To cancel the specified line, hover the mouse over the line and right-click to display
the context menu. Select [Delete] or [Clear (
7. When done, click [Apply (
To set defined area based rule
1. Set <IV analysis function> to
<Enable>.
2. Set the type to <Line/Area/Scene
Change>.
3. Set the event rule to <Defined area
based rules>.
4. Click a corner point of a desired area in
the video to display the popup window.
)].
)].
English _99