Samsung SNP-6200 User Manual page 84

setup screen
Port
1. From the Setup menu, select the
<Network (
2. Click <Port>.
3. Type in each item in the Port menu as
necessary.

Neither the port range between 0 and 1023
nor port 3702 is available.
• HTTP port : HTTP port used to
access the camera via the web
browser.
The default is 80(TCP).
• Device port : Set a port used to transfer video signals with the Samsung
protocols.
• RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
• Web Streaming Port : Used to transfer videos to the Web Viewer; the default is
4520.
• Silverlight policy port : Silverlight is used to permit to acquire a network
connection; the default is 943.

The port range of the Web Streaming is between 4502 and 4534. If the Device port is with this
effective range, the Web Streaming port should be specified the same as the Device port.

You cannot change the Web Streaming/Silverlight policy server port of a camera.
4. When done, click [Apply (
DDNS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of
a camera into a general Host Name so that the user can easily remember it.
1. From the Setup menu, select the
<Network (
2. Click <DDNS>.
3. Select <DDNS> that you want to use.
4. Type in the DDNS items according to
the selected type.
• Samsung DDNS : Select this if you
use the DDNS server provided by
Samsung Techwin.
84_ setup screen
)> tab.
)].
)> tab.