INSTALLATION
Preparing Adapter and Cable
J
Connect the camera to the power adaptor. Then, plug the power cord of the adaptor to the wall
outlet.
Check out the rated voltage and current before making connections.
Rated Power
AC 24V
J
SNP-6200 : If PoE+ and AC 24V are both applied, this camera will get supplied with power from
PoE+.
SNP-6200H
If PoE+ and AC 24V are both applied in heater operation mode, the heater will be powered by
-
AC 24V and the other devices will get supplied with power from PoE+.
-
If PoE+ and AC 24V are both applied with heater turned off, this camera will get supplied with
power from PoE+.
If using PoE+, the heater will not operate at all.
-
Use an adaptor if the installation site requires heater operations. Adaptor is sold separately.
-
For installation and specification of the power adaptor, refer to the related section.
-
If using a PoE-enabled switch, it is advisable to set the switch to "Disable PoE".
Allowable Input Voltage
AC 22V ~ 26V
Current Consumption
2.5 A
English _29