Samsung SNP-6200 User Manual page 95

VA / MD
1. From the Setup menu, select the
<Event ( )> tab.
2. Click <VA / MD>.
❖ Motion Detection (MD)
1. Select a motion detection mode.
2. Specify the use of motion detection.
3. Select a sensitivity level of the motion
detection.
Higher the sensitivity is, the smaller
motion is detected.
4. Use the drag-and-drop method to
specify the detection area on the video.
5. Specify the activation time and activation
condition.

For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 94)
6. When done, click [Apply ( )].
English _95