Samsung SNP-6200 User Manual page 33

❖ Configuring Camera DIP Switches
DIP switches for communication and ID protocols are located on the bottom of the camera.
❖ Connecting Camera Safety Cable and Attaching Camera
1. Carefully attach the camera to the mount following the alignment guide marks as
shown in the picture.
2. First, hook the camera's safety cable on the mount, and then attach the camera.
The safety cable is coiled inside the base.
3. As shown in the left hand picture, pull out the safety cable from the base and then
hook it to the mount.

To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.
Safety
Cable

J
Make sure to hook the camera's safety cable to the mount before proceeding. Otherwise you may
be exposed to serious injury caused by the camera falling.
DIP Switches
Direction
Guides
Direction
Guides
Align the
Direction Guides
English _33