Samsung SNP-6200 User Manual page 100

setup screen
5. Select a desired <Defined Area Based Rules>.
• Entering : This event rule detects an event of object's center entering into the
defined area from outside through the boundary of the area.
• Exiting : This event rule detects an event of object's center exits from the inside of
the defined area through the boundary of the area.
6. Click [OK].
To cancel the specified area, hover the mouse over the area and right-click to display
the context menu. Select [Delete] or [Clear (
7. When done, click [Apply (
To set entire area based rule
1. Set <IV analysis function> to
<Enable>.
2. Set the type to <Line/Area/Scene
Change>.
3. If you set the event rule to <Entire
area based rules>, this will display the
popup window.
4. Select a desired <Entire Area Based
Rules>.
• Scene Change : An event where the screen is changed at more than a certain time
interval will be detected.

Detecting a scene change may take a while from the actual change.

For stability purposes, the operation pauses for a short period when a scene change event occurs,
and no other detection instance of events (including scene change) functions within the duration.

Detection performance may drop under circumstances such as monotonous background, night or
low lighting.
5. Click [OK].
To cancel the existing area, right-click on the Entire area to display the popup dialog
and select [Delete] in the context menu.
6. When done, click [Apply (
100_ setup screen
)].
)].
)].