Samsung SNP-6200 User Manual page 70

setup screen
3. When done, click [Apply (
4. Press [

J
After saving the preset, make sure to close preset editing mode by clicking [
"Back" button of the browser. If you change the settings of other camera while the window is still
open, this may cause an error.
To set the home position
1. Move to a desired start screen point and press [
The point will be set to the home position.
2. Click [
position.
To configure the swing settings
Swing is a monitoring function that moves between two preset points and enables you to
trace the motion.
1. Set <Mode> in <Sequence setup> to
<Swing>.
The menu screen will switch to the
swing setting screen.
2. Select a swing setting mode.
• Pan swing : You can set the swing
monitoring only using the PAN
function.
• Tilt swing : You can set the swing
monitoring only using the Tilt
function.
• Pan & Tilt swing : You can set the swing monitoring only using both PAN and Tilt
functions.
3. Set <First preset> and <Second preset> to specify a swing range.
4. Set the moving speed and dwell time.
5. Press the [
The first preset, second preset, speed and dwell time will be saved in set mode.
6. Press the [
It performs the swing operation.
7. Press the [
The running swing will be stop.
70_ setup screen
] to return to the PTZ setup screen.
] in the home position. You will move to the predetermined home
] button.
] button.
] button.
)].
] button or
].