Setting Access Point - Panasonic P-05D Instruction Manual

Setting Access Point

Access points for Internet connection (sp-mode and mopera
U) are added by default. You can add and modify access
points as necessary.
• By default, sp-mode is selected as default access point.
However, the settings may differ depending on the terms set
forth in your contract.
Checking Access Point in Use
Home screen
& networks]
[Mobile networks]
Setting Additional Access Point
• Do not change MCC to other than 440, or MNC other than 10.
If you change MCC/MNC, the access point will no longer be
displayed on the screen.
Home screen
& networks]
[Mobile networks]
[New APN]
M W
[Name]
W
create [OK]
W
[APN] Enter an access point
W
Enter other items required by the network
operator
W
• If MCC or MNC has been changed and the access
point is not displayed on the screen, reset access
point settings to the default status, or manually
configure the access point.
W M W
[Access Point Names]
W
W M W
[Access Point Names]
W
Enter the name of network profile to
[Save]
M W
97
[Settings] [Wireless
W
[Settings] [Wireless
W
[OK]
W
W
Initial Setting