Panasonic P-05D Instruction Manual page 188

[Scan for devices]
• Detected Bluetooth devices are listed in the
Bluetooth device list.
• Mark [Discoverable] checkbox to allow other
Bluetooth devices to detect this mobile phone.
You can set discoverable time at [Discoverable
timeout].
Select a detected Bluetooth device and perform
pairing with the device
If necessary, enter pass code (PIN)
• If the other Bluetooth device also requires pass
code (PIN), enter corresponding pass code (PIN).
• When pairing is established, status description
such as [Paired but not connected] and
[Connected to phone and media audio] appears
below the device name.
Information
• If you do not use Bluetooth communication, turn off the
Bluetooth function to save energy consumption.
• Bluetooth on/off setting remains unchanged after the power is
turned off.
• The Bluetooth function is turned off when Portable Wi-Fi
hotspot is enabled (Z P.132).
Changing Device Name
You can change the name of your mobile phone displayed
on the other device during Bluetooth communication.
Bluetooth settings screen
Enter name [OK]
W
187
[OK]
W
[Device name]
W W
File Management