External Devices; Wireless Lan Connection - Sony PXW-Z190V Operating Instructions Manual

External devices

Symptom
The computer does not
recognize the camcorder.
Clips cannot be loaded on
the computer.

Wireless LAN connection

Note
• Obstructions and electromagnetic interference between the camcorder and wireless LAN access point or terminal
device, or the ambient environment (such as wall materials) could shorten the communication range or prevent
connections altogether. If you experience these problems, check the connection/communication status after moving the
camcorder to a new location, or bringing the camcorder and access point/terminal device closer together.
Symptom
A terminal device cannot
access the camcorder.
You cannot log in to the
camcorder.
The web remote control
does not appear.
Solution
Disconnect the USB cable from the computer, then connect it again securely.
Disconnect the USB cable from your computer, reboot your computer, and follow the
steps again in the correct order.
Disconnect the USB cable from the computer, restart the camcorder, and then connect it
again.
Application software must be installed to load clips on your computer (page 59).
Solution
• Check the wireless LAN connection (IP address, etc.).
• The communication setting between the access point and client may be invalid. For
details, refer to the operating instructions of the access point.
Check the user name and password that you set.
Check the IP address setting.
106