External Devices; When Making A Wireless Lan Connection - Sony PXW-X200 Operating Instructions Manual

External Devices

Symptoms
The equipment connected
to the camcorder via an
i.LINK connection does
not react as expected, for
example, no picture
appears on its screen.

When Making a Wireless LAN Connection

Note
Obstructions and electromagnetic interference between the camcorder and wireless LAN access point or terminal device,
or the ambient environment (such as wall materials) could shorten the communication range or prevent connections
altogether. If you experience these problems, check the connection/communication status after moving the camcorder to
a new location, or bringing the camcorder and access point/terminal device closer together.
Symptoms
The terminal device cannot access to the
camcorder.
You cannot log in to the camcorder.
The Web menu does not appear.
The file uploading fails.
140 Troubleshooting
Cause
It sometimes takes time for the
connected equipment to recognize
the operation.
Remedy
• Check the connection settings of the terminal device such as the IP address
setting, etc.
• The communication setting between the access point and client may be
invalid.
For details, refer to the operating instructions of the access point.
Check the user name and password that you set.
• Check the IP address setting.
• Check that the port number (:8080) is added to the IP address.
The user name and password of the server may not be correct.
Input the correct user name and password.
Remedy
Wait for about 15 seconds. If the connected
equipment still does not react, do the following:
• Check the i.LINK cable, for example, by re-
plugging it.
• Turn the power off, and connect the cable again.
• Change the i.LINK cable.