HP ProLiant DL385 G5p Maintenance And Service Manual page 57

Remove all power supplies
2.
Extend or remove the server from the rack
3.
server from the rack" on page 25).
Remove the access panel
4.
Remove the PCI riser cage
5.
Remove the battery pack
6.
Remove the air baffle
7.
Remove the power supply backplane
8.
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
Remove the hot-plug fans from the fan cage
9.
Remove the fan cage
10.
Remove all DIMMs ("DIMMs" on page 53).
11.
Remove the heatsink ("Heatsink" on page 46).
12.
Open the processor retaining latch and the processor socket retaining bracket.
13.
("Hot-plug power supply" on page 28).
("Remove the server from the
("Access panel" on page 30).
("PCI riser cage" on page 38).
("Removing the battery
("Air baffle" on page 39).
("Power supply
("Hot-plug
("Fan cage" on page 39).
rack" on page 27,
pack" on page 45).
backplane" on page 35).
fan" on page 36).
Removal and replacement procedures 57
"Extend the