Remove The Server From The Rack; Access The Product Rear Panel - HP ProLiant DL385 G5p Maintenance And Service Manual

Remove the server from the rack

To remove the server from an HP, Compaq branded, telco, or third-party rack:
Power down the server (on page 26).
1.
Extend the server from the rack (on page 25).
2.
Disconnect the cabling and remove the server from the rack. For more information, refer to the
3.
documentation that ships with the rack mounting option.
Place the server on a sturdy, level surface.
4.

Access the product rear panel

Cable management arm with left-hand swing
To access the server rear panel:
Remove the cable arm retainer.
1.
Removal and replacement procedures 27