Power Supply Backplane - HP ProLiant DL385 G5p Maintenance And Service Manual

Remove the three T-10 Torx screws, and then detach the front bezel.
8.
To replace the component, reverse the removal procedure.

Power supply backplane

To remove the component:
Power down the server (on page 26).
1.
Remove all power supplies
2.
Extend or remove the server from the rack
3.
server from the
Remove the access panel
4.
Remove the power supply backplane.
5.
To replace the component, reverse the removal procedure.
("Hot-plug power
rack" on page 25).
("Access panel" on page 30).
supply" on page 28).
("Remove the server from the
Removal and replacement procedures 35
rack" on page 27, "Extend the